1949 Rover 75 P3 Saloon *Sold £3,050*

Lot Ref767
MAKERover
MODEL75 P3 Saloon
REGISTRATIONFFW 958
ENGINE SIZE2103
TRANSMISSION4 Speed Manual
MOT EXPIRY DATE12/12/2024
CURRENT V5
COLOURRed & Black
INTERIORGrey
LOCATIONSouthampton, Hampshire SO31

1949 Rover 75 P3 Saloon *Sold £3,050*

In stock

 

 

Description

“One of Britain’s Finest Cars—Now Made Finer” is how the Rover brochure described the post-war classic Rover P3 75. They were right too. These Rovers were only made for two years. That makes them rather scarce today and, in this condition, very desirable. 

History 

  • Original buff logbook from 1949 
  • Old MOTs  
  • Invoices for recent work carried out 

Outside 

The Rover P3 75 (the P standing for post-war) designed by Gordon Bashford was an entirely new Rover. It had the quality of Rover’s recent past, though the 75 was half an inch wider outside than the 16 it replaced, it was 2.5 inches wider inside. The Rover 75 could be bought in tall roof, “six-light” (three windows per side) Saloon, or Sports Saloon body styles. 

All doors were rear hinged “coach doors” (or suicide doors). Remarkably for the time the Rover was produced in five colours— black, green, grey, maroon, and “Sundown” each with specific contrasting interior colours. 

This Rover P3 75 is the so-called ‘Six-Light Saloon’. The Black and Red paintwork suits the big Rover. All the chrome is in good order, bear in mind that this car was built in 1949 though. It comes with lovely period features. Take a look around the car; those superb headlights, running boards, semaphores and those hubcaps. 

Inside 

Features we just do not see on modern cars such as the armchair like armrests in the rear are all still there. Up front it is the same. The wood instrument panel and full instrumentation were part and parcel of the era. The original three thin spoke steering wheel remains. Ventilation improvements promised 100 cubic feet of air per minute. Or you could just open the huge windows, your choice. 

It is a septuagenarian now so don’t be expecting a new car.  

Mechanicals 

The whole of Britain faced enormous challenges in 1949. None more so than manufacturing industries. Rover took a bold step to innovate with the Rover P3. 

The 1948-49 P3 Rover line was vastly simplified. The engines were the singular four and six-cylinder lines respectively dubbed 60 and 75 after approximating real horsepower ratings. 

The engines were a clean-sheet post-war design, featuring several modern features: 

  • Inclined cylinder head 
  • Intake valves in the cylinder head 
  • Exhaust valves in the block itself 
  • A side mounted double-roller-chain-driven camshaft. 
  • This required crossflow intake and exhaust manifolds 
  • The upmarket six-cylinder engine like this one, used a two-barrel down-draught carburetor 
  • Light metal alloys were used in valve covers, timing covers, and the oil pan 

This 2.1 litre straight-six makes 72 hp at 4,000 rpm. Rover designed a nearly hemispherical combustion chamber, with the spark plug located in the centre. 

The engine is mated to a floor shifted four-speed manual with synchromesh on third and fourth gears, plus a freewheeling function to allow clutchless shifting on the move. 

This Rover P3 75 has other innovations that would be carried over into the modern-looking P4 75 of 1950. 

  • Independent coil spring front suspension with an anti-roll bar 
  • A semi-elliptical leaf spring rear 
  • The frame itself was all steel rather than the previous steel-over-ash construction Rover 
  • The rear leaf springs were attached directly to the body rather than the chassis. 
  • Hydraulic front brakes 

All of this results in increased rear-axle travel and a smoother ride. 

Our vendor has owned the P3 for 16 months during which time he has spent a whopping £10,000 on mechanicals. An invoice from Classic Car Mechanic, Liphook is in the gallery. Our vendor goes on to tell us  

It was successfully MOT’d on 13 Dec, so the MOT expires on 12 Dec 2024.  It showed 31,161 miles on the odometer at that time and since then I have driven it regularly two or three times a month on local round trips of 15-20 miles, the last occasion being in September.  The gearbox is nice and tight in all gears with no obvious wear, this is one of the reasons that I bought this particular car. 

Instrument wise, the speedo seems to be accurate enough to use, according to my comparisons with Google Maps. The oil pressure, oil volume & water temperature gauges, and the ammeter work showing appropriate values, but I cannot judge their accuracy.  The petrol gauge, however, is stuck on full.  The clock does not work. 

Everything else in the vehicle still works as per the MOT, at the time of writing, except for the horn and fog lamp; although these do work if powered independently.    

The interior of the cabin is in slightly better condition than when I bought it and is original. The carpets and doors are OK. The passenger seats are in tolerable condition, but the driver’s seat needs attention. The head liner has rotted in one small place in one rear corner but otherwise is in original condition. The windows work except for the right-hand rear one where a runner appears loose. All doors function fully. 

Externally the car is fitted with five good radial tyres with lots of tread on them. 

The chrome work is original and still fairly bright but needs polish from time to time as one would expect. The paintwork is the same condition as when I bought it except that there are a number of places on the black roof where it is now cracking. Please see the pictures in the gallery. The sunroof does not work, it was closed off internally but left open externally by whoever did the paint job (at least 5 years ago) and the although the drain holes may have worked at that time they did not still work when I bought it. This resulted in me getting soaked when I drove it in the rain until I covered over all of the related external parts with tape.   

This car is still supported by the Rover Sports Register members and advertisers, and I had been going to address the roof and interior in slow time, but the peeling paint has caused me to reconsider my ownership as I cannot keep the car indoors where it needs to be, at least for now. 

The engine starts on the button and runs smoothly. 

Details of Work carried out by CCM, Liphook are as follows, please see the invoice in the gallery.  

  • Resolve various electrical issues 
  • Renew perished radiator cap seal 
  • Renew perished fuel cap seal 
  • Renew perished heater hose 
  • Renew fuel hose at the carburetor 
  • Renew left front king pin 
  • Renew perished rear cross member bushes 
  • Renew all four shock absorbers 
  • Renew both prop shaft universal joints 
  • Renew differential input seal 
  • Renew exhaust heatshield 
  • Renew exhaust 
  • Renew engine sump gasket, oil and filter 
  • Renew engine mounts  
  • Renew steering idler and bushes 
  • Renew both front brake flexible hoses 
  • Renew/repair front brake wheel cylinders 
  • Renew front brake shoes 
  • Renew rear axle/hub seals 
  • Renew oil strainer 
  • Braze fuel tank pick up boss 
  • Renew main battery line 
  • Renew fuel line underneath  
  • Run electric cable and fix 
  • Run new live to the ignitions 
  • Make up exhaust mounts 
  • Welding to boot floor 
  • Welding to front of both sills 
  • Advisory repairs which were all satisfactorily carried out prior to the MOT – adjust clutch position – repair wiper functioning – clean up wiper motor and connections. 
  • The (secondary) in-sump oil filter was replaced with a new one.   

Our vendor has also replaced both of the heater air hoses with the correct sized piping from the Rover Sports Register, bought a starting handle, a spare starter solenoid and three maintenance manuals. 

Summary 

This Rover P3 75 is here to be sold. Our vendor has been extremely frank, he just cannot provide any shelter for the car and would like it to go to a home where it can be protected from the elements. Will you be its saviour?

Do you have a classic car for sale? Please feel free to get in touch to have a no obligation chat with us: Contact The Evoke Team

Title

Go to Top