mnjautocare
Moderator
Post count: 2

Hi Steve,
For DIY, using domestic electrics. I would suggest using a welder with a minimum output (lowest setting) of no more than 30amps as it will just blow holes in your panels.
Inverter MIG sets are more efficient than the older transformer sets, meaning you have a lot more control over what material you are welding (body panels 0.6 – 0.9mm, chassis rails 2-3mm etc)
For at home restorations I would recommend something like the R-Tech 180amp portable inverter Mig welder. This will give you the ability to diversify your welding tasks without being limited by your machine.
I agree with your comment about gasless welding sets, in my experience – welds are inconsistent, wire is expensive in comparison etc.
The R-Tech 180 comes with a gas regulator, 3 year warranty & very good technical support. Most hire shops etc do welding gases now at a reasonable price.
Check out this link for more info HAPPY WELDING !!!

https://www.r-techwelding.co.uk/mig-welder-r-tech-i-mig180

Thank you & I hope this helps you find the ideal welder.
Take care,
Jody / Auto Lass